Full Range of Rebar Products & Delivery

Rebar is known as a steel used for reinforcement and reinforcing. Rebar Cut & Bend sells top quality steel bars or mesh of steel wires used to reinforce concrete and masonry structures or to strengthen and hold the concrete. We improve the quality of the bond with the concrete, by patterning the rebar surface.

All of our steel products are available with matching Mill Test Reports so you can be sure that what you buy is what you receive. We will also provide you with competitive rebar prices.

Rebar Products

Cold Rolled Coil Flat Steel

Rebar / Coil

Details
A rebar (short for reinforcing bar), is a common steel bar, and is regularly used as a tensioning device in concrete and masonry structures holding the concrete in compression. It’s available in Grade 40, Grade 60, and Grade 75 (which refers to the tensile strength), and comes most commonly in 3/8” diameter through 1-3/8”. The standard designation is ASTM A-615 for plain carbon.
Wire Mesh

Wire Mesh

Details
Welded wire mesh, or welded wire fabric, is a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing. Machines are used to produce the mesh with precise dimensional control. The product can result in considerable savings in time, labor and money. Standard building mesh comes in a 6” x 6” or a 4” x 4” spacing. The diameter of the wire for building mesh ranges from .134” to .225”. The standard designation is ASTM A82 for plain steel wire for concrete reinforcement.
Rebar Coil

Cold Rolled Coil/Flat

Details
Size range : 24 gauge to 10 gauge, 36", 48", 60" width.

ASTM A 1008

A fully processed carbon steel, annealed for softness, then temper passed and lightly oiled.

Fabricated Products

Steel Rebar

Steel Rebar

Details
STRAIGHT REBAR - EPOXY COATED REBAR - GALVANIZED REBAR - REBAR IN COIL At CNB Rebar, our reinforcement steel bars are supplied in 20’, 40’, 60’ stock lengths. We offer our customers straight, galvanized or epoxy coated rebar in Grade 40, Grade 60, and Grade 75 which meets the ASTM A-615 standard.
Wire Rod

Wire Rod

Details
Our wire rod can be supplied in various qualities: 1- Industrial Quality (DQ Quality) Low and high carbon wire rod for electrodes, bolts and thin wire 2- Construction Quality (MQ Quality)Low carbon wire rods used in steel mesh, wire and nail production.
Welded Wire Mesh

Welded Wire Mesh

Details
We can supply our customers with a full line of welded wire mesh products for a wide range of application. Common sizes are attached.
Rebar Tie Wire

Rebar Tie Wire

Details
Roll Tie Wire - Double Loop Tie Wire We offer our customers with 16 gauge black annealed or epoxy coated steel tie wire that is uniformly coiled and packaged to fit standard tie wire reels. Black annealed tie loops are offered at 16 gauge in diameter and 6” and 8” lengths.Our tie wire is supplied in a 5000 piece continuous roll or 5 rolls of 1000 pieces per bag.
Slab Bolster

Slab Bolster

Details
Our steel slab bolsters cover heights ranging from 1’ to 10’, in 5 foot lengths.

Guaranteed Rebar Materials & Delivery

We guarantee to have the materials you need, delivered when you need them and do it better than any other supplier. We provide high levels of quality control, and will help you meet the quality control requirements for your business.

Mill Test Reports

All of our steel products are available with matching Mill Test Reports so you can be sure that what you buy is what you receive. We will also provide you with competitive rebar prices.

Offices Locations

Rebar Cut & Bend LLC is located in New York, New Jersey and, Connecticut. Between our two ports, one at the Tioga Marine Terminal, located in Philadelphia, PA, and the other at Gateway Harbor Terminal located in New Haven, CT. This allows us to provide our clients with faster, more efficient access to the world's finest steel.

Free Consultation & Quote
Iron Rods

Our Rebar Warehouses

Philadelphia Rebar
Tioga Marine Terminal, Philadelphia, PA
Connecticut Rebar
Gateway Harbor Terminal, New Haven, CT